Flexible smart phones are desirable for a lot of users. Up to now the displays of the innumerable phones and pods are rigid and do not yield to the anatomical forms adopted by the people carrying them. By now it is no longer any secret that the big players in the industry are working on flexible displays. INM - Leibniz Institute for New Materials shows how they might become reality in the near future by presenting suitable coatings for cost-efficient inkjet processes. For more information see the IDTechEx report on stretchable and conformal electronics.
INM will be demonstrating flexible touch screens, which are produced by printing recently developed nanoparticle inks on thin plastic foils. These inks composed predominantly of transparent, conductive oxides (TCOs) are suitable for a one-step printing process. Thus transparent lines and patterns are obtained by inkjet printing or alternatively by direct gravure printing, which are electrically conductive even after bending. Thus, a one-step-printing process for cost-efficient electrode patterns is enabled.
Conductive coatings with TCOs are usually applied by means of high vacuum techniques such as sputtering. For patterning of the TCO coatings additional cost-intensive process steps are necessary, for example photolithography and etching.
"We use the TCOs to produce nanoparticles with special properties," explains Peter William de Oliveira, Head of the Optical Materials Program Division. "The TCO ink is then created by adding a solvent and a special binder to these TCO particles. The binder performs several tasks here: it not only makes the TCO nanoparticles adhere well on the substrate; it also increases the flexibility of the TCO coating: in this way, the conductivity is maintained even when the films are bent. Using an adapted electrode pattern, flexible capacitive touch screen sensors with high sensitivity and resolution can thus be printed in a simple process". After curing under UV light at low temperatures less than 130 degrees centigrade, the coating is completed.
The transparent, electronically conductive inks allow conductor tracks to be produced easily even on classic reel-to-reel processes. Initial trials at INM have been promising. The researchers all agree that the use of structured rollers will in the future allow structured, conductive surfaces to be printed with a high throughput at low cost.
Source and top image: INM - Leibniz Institute for New Materials
Learn more at the next leading event on the topic: Printed Electronics USA 2018 on 14 - 15 Nov 2018 at Santa Clara Convention Center, CA, USA hosted by IDTechEx.