MGX Minerals Inc reported that its collaborative research partnership with the University of British Columbia has completed a comprehensive baseline assessment of metallurgical silicon originating from each of the Company's three silicon projects in southeastern British Columbia. MGX and UBC are working together to develop next-generation Li-ion batteries capable of quadrupling energy density from current 100 Wh/kg up to 400 Wh/kg for use in long-range electric vehicles and grid storage. For more information see the IDTechEx report on Advanced Li-ion and Beyond Li-ion Batteries 2018-2028.
With the Phase One assessment completed, Phase two of the collaborative is now underway and will focus on developing a scalable process to upgrade metallurgical silicon originating from MGX's projects to battery-grade silicon anode. The developed silicon anode will serve as a viable replacement over the present graphite anode and enable higher-energy-density lithium-ion batteries for numerous applications, including electric vehicles, grid storage, telecommunication, wireless sensors and more.
The objective of the MGX/UBC research consortium is to develop a low-cost and scalable method that will fabricate a silicon-based anode to improve the energy density of Li-ion batteries. The two-year research program seeks to focus on 1) fabricating nanostructured silicon using low-cost metallurgical silicon as a feedstock and 2) compositing nanostructured silicon with commercial graphite to develop a high-performance silicon anode. The initial goal of the research is to replace the graphite anode with silicon and complete a hybrid in the short-term which will not require industry retooling. The ultimate goal is to enable next-generation Li-ion batteries capable of quadrupling energy density from current 100 Wh/kg up to 400 Wh/kg for use in long-range electric vehicles and grid storage.
Dr. Jian Liu, Assistant Professor in the School of Engineering at UBC Okanagan, is leading a research group focused on advanced materials for energy storage. Dr. Liu was previously the technical lead for development of surface coating materials by atomic and molecular layer deposition, and their applications in surface and interface engineering on the anode and cathode of Li-ion batteries and beyond, at Western University and Pacific Northwest National Laboratory.
Source: MGX Minerals
Top image: Pixabay
Learn more at the next leading event on the topic: Electric Vehicle Materials Europe 2020 on 13 - 14 May 2020 at Estrel Convention Center, Berlin, Germany hosted by IDTechEx.