Hosted by IDTechEx

Off Grid

Off Grid Energy Independence
May 15, 2020
DSM and Lightyear Join on Solar Roofs for the Electric Vehicle Market

DSM and Lightyear Join on Solar Roofs for the Electric Vehicle Market

Lightyear and Royal DSM have signed an agreement to jointly scale the commercialization of Lightyear's unique solar-powered roof for the electric vehicle market. With this solution, both companies aim to accelerate the global adoption of a broad range of electric vehicles.
Off Grid Energy Independence
May 14, 2020
Webinar 19 May Threats & Opportunities for Thermal Interface Materials

Webinar 19 May Threats & Opportunities for Thermal Interface Materials

This webinar provides analysis on IDTechEx's latest research into thermal interface materials. This will include an overview of the material trends, the market landscape, and highlight two case studies.
Off Grid Energy Independence
May 14, 2020
Uptick for Renewable Electricity Generation in 2019

Uptick for Renewable Electricity Generation in 2019

While the ongoing health, political, economic and social impacts of the coronavirus pandemic continue to preoccupy people across the world, as recovery plans are discussed and taking shape, decision makers are encouraged to use this as an opportunity to set our societies on a more sustainable development path.
External Company Press Release
Solar Powered Water Purifier and Sanitation System

Solar Powered Water Purifier and Sanitation System

As more and more people seek ways to stays safe amidst the COVID-19 pandemic and try to engage in more outdoor activities for mental health such as camping or hiking, GoSun has released the world's first portable, solar-powered water purification and sanitation system.
Off Grid Energy Independence
May 12, 2020
Sweat Powered Electronic Skin

Sweat Powered Electronic Skin

The e-skin, made from soft, flexible rubber, can be embedded with sensors that monitor information like heart rate, body temperature, levels of blood sugar and metabolic byproducts that are indicators of health, and even the nerve signals that control our muscles. It does so without the need for a battery, as it runs solely on biofuel cells powered by one of the body's own waste products.
Off Grid Energy Independence
May 12, 2020
Promising Material Stable Enough for use in Solar Cells

Promising Material Stable Enough for use in Solar Cells

Soft and flexible materials called halide perovskites could make solar cells more efficient at significantly less cost, but they're too unstable to use.
Off Grid Energy Independence
May 12, 2020
Webinar 18 May - Self-Powered Electronics: The Race Is On

Webinar 18 May - Self-Powered Electronics: The Race Is On

This webinar shares some of the research for the new IDTechEx report, "Energy Harvesting for Electronic Devices 2020-2040". It comes at just the right time. The world's first self-powered smart watches have just arrived. They are not full-function but we are getting there. That billion a year harvester potential will be followed by similar numbers of Internet of Things nodes. Learn other big prizes making several of the world's largest companies research energy harvesting.
Off Grid Energy Independence
May 11, 2020
Free Webinar 14 May - Off-Grid Clean Electricity Riding the Megatrends

Free Webinar 14 May - Off-Grid Clean Electricity Riding the Megatrends

Learn how zero-emission microgrids will slice into the energy market to become a massive $350Bn business in 2040. See the examples of mining, remote villages and urban water taxis. For distributed generation, what is the most popular new form of high-power solar harvesting after silicon and why? Examples? It is all in this webinar.
Off Grid Energy Independence
May 8, 2020
Charging infrastructure: the key for electric vehicle take-off

Charging infrastructure: the key for electric vehicle take-off

Global plug-in electric vehicle (EV) population reached 7.5 million units (including light commercial vehicles) by the end of 2019.
Off Grid Energy Independence
May 8, 2020
3D-Printed Concrete to Help Build Offshore Wind Infrastructure

3D-Printed Concrete to Help Build Offshore Wind Infrastructure

Conventional concrete manufacturing methods require a mold to shape the concrete into the desired structure, which adds to costs and limits design possibilities. 3D-printing would eliminate the expenses of this mold.
Off Grid Energy Independence
May 15, 2020
DSM and Lightyear Join on Solar Roofs for the Electric Vehicle Market

DSM and Lightyear Join on Solar Roofs for the Electric Vehicle Market

Lightyear and Royal DSM have signed an agreement to jointly scale the commercialization of Lightyear's unique solar-powered roof for the electric vehicle market. With this solution, both companies aim to accelerate the global adoption of a broad range of electric vehicles.
Off Grid Energy Independence
May 14, 2020
Uptick for Renewable Electricity Generation in 2019

Uptick for Renewable Electricity Generation in 2019

While the ongoing health, political, economic and social impacts of the coronavirus pandemic continue to preoccupy people across the world, as recovery plans are discussed and taking shape, decision makers are encouraged to use this as an opportunity to set our societies on a more sustainable development path.
Off Grid Energy Independence
May 12, 2020
Sweat Powered Electronic Skin

Sweat Powered Electronic Skin

The e-skin, made from soft, flexible rubber, can be embedded with sensors that monitor information like heart rate, body temperature, levels of blood sugar and metabolic byproducts that are indicators of health, and even the nerve signals that control our muscles. It does so without the need for a battery, as it runs solely on biofuel cells powered by one of the body's own waste products.
Off Grid Energy Independence
May 12, 2020
Webinar 18 May - Self-Powered Electronics: The Race Is On

Webinar 18 May - Self-Powered Electronics: The Race Is On

This webinar shares some of the research for the new IDTechEx report, "Energy Harvesting for Electronic Devices 2020-2040". It comes at just the right time. The world's first self-powered smart watches have just arrived. They are not full-function but we are getting there. That billion a year harvester potential will be followed by similar numbers of Internet of Things nodes. Learn other big prizes making several of the world's largest companies research energy harvesting.
Off Grid Energy Independence
May 8, 2020
Charging infrastructure: the key for electric vehicle take-off

Charging infrastructure: the key for electric vehicle take-off

Global plug-in electric vehicle (EV) population reached 7.5 million units (including light commercial vehicles) by the end of 2019.
Off Grid Energy Independence
May 14, 2020
Webinar 19 May Threats & Opportunities for Thermal Interface Materials

Webinar 19 May Threats & Opportunities for Thermal Interface Materials

This webinar provides analysis on IDTechEx's latest research into thermal interface materials. This will include an overview of the material trends, the market landscape, and highlight two case studies.
External Company Press Release
Solar Powered Water Purifier and Sanitation System

Solar Powered Water Purifier and Sanitation System

As more and more people seek ways to stays safe amidst the COVID-19 pandemic and try to engage in more outdoor activities for mental health such as camping or hiking, GoSun has released the world's first portable, solar-powered water purification and sanitation system.
Off Grid Energy Independence
May 12, 2020
Promising Material Stable Enough for use in Solar Cells

Promising Material Stable Enough for use in Solar Cells

Soft and flexible materials called halide perovskites could make solar cells more efficient at significantly less cost, but they're too unstable to use.
Off Grid Energy Independence
May 11, 2020
Free Webinar 14 May - Off-Grid Clean Electricity Riding the Megatrends

Free Webinar 14 May - Off-Grid Clean Electricity Riding the Megatrends

Learn how zero-emission microgrids will slice into the energy market to become a massive $350Bn business in 2040. See the examples of mining, remote villages and urban water taxis. For distributed generation, what is the most popular new form of high-power solar harvesting after silicon and why? Examples? It is all in this webinar.
Off Grid Energy Independence
May 8, 2020
3D-Printed Concrete to Help Build Offshore Wind Infrastructure

3D-Printed Concrete to Help Build Offshore Wind Infrastructure

Conventional concrete manufacturing methods require a mold to shape the concrete into the desired structure, which adds to costs and limits design possibilities. 3D-printing would eliminate the expenses of this mold.
More IDTechEx Journals