In this article, IDTechEx Technology Analyst Noah El Alami discusses the potential of the new generation of nuclear technologies - fission small modular reactors (SMRs) and fusion energy - in powering the ever-increasing capacity of AI data centers.

BESS developers are adopting various passive and active thermal management materials and technologies to improve the safety of their Li-ion BESS technologies. By understanding the root causes and impacts of BESS failure, battery storage players and regulators can target Li-ion BESS technology development with a greater targeted purpose, putting an emphasis on safety to reduce fire and explosion risk. A key pathway to address Li-ion BESS failures could also be with large-scale fire testing (LSFT).

Bipolar plates are a key component of PEM fuel cells, providing structural support and carrying out a major role in the power generating electrochemical reaction. This article discusses the materials consideration for plates, which can be made from metal or graphite/graphitic composite.

Supercapacitors are energy storage devices that offer distinct properties when compared to batteries. Supercapacitors have higher power density and lower energy density than batteries. They also have a significantly larger cycle lifetime, in the tens of thousands, which enables them to undergo frequent charge-discharge cycles without degradation. This allows them to perform in applications where batteries are not appropriate. IDTechEx covers supercapacitors in detail in its recent report: "Supercapacitors 2026-2036: Technologies, Applications and Forecasts".

The climate crisis demands diversity in decarbonization solutions. From CCUS (carbon capture, utilization, and storage) to renewable electricity from wind and solar power, many green technologies must grow in tandem. In this article, IDTechEx explores how electrochemical technologies could redefine carbon capture as an energy asset.

The transition to 800V EVs is one which affects the whole powertrain, including the power electronics. In IDTechEx's report, Power Electronics for Electric Vehicles 2026-2036: Technologies, Markets, and Forecasts, these trends are analysed and used to forecast the adoption of wide bandgap semiconductors SiC and GaN, as well as the entire power electronics market for electric vehicles (EV).

As the demand for clean green hydrogen grows, electrolyser demand will grow in tandem. This article details which electrolyser components will seize market value based on adoption of different electrolyser technology solutions.

The reliability of high-tech, miniaturized technologies is something easily assumed, but could they be reaching their peak? The looming presence of recent solar flare activity impacting communications is a reminder of the large and ever-present phenomenon of outer space, and could mean preparing for the return of communication-by-pigeon.

Despite a year of critical material supply disruptions, technology mega-trends in decarbonization, electrification, automation and AI continue to fuel demand for high-performance rare earth magnets. IDTechEx forecasts that rare earth magnet demand will reach 332 ktpa by 2036 and breaks down usage and adoption trends in electric vehicles, wind turbines, and robotics growth markets.

Join Dr Conor O'Brien on Thursday 11th December for an insightful webinar on "Materials Trends for Proton Exchange Membrane Fuel Cells". The webinar will include an introduction to PEM fuel cells, an overview of the key applications driving market growth, a breakdown of the forecast market value in 2036 segmented by fuel cell component, and a detailed discussion of the major materials trends in the sector for the core components.

Stationary fuel cells and green hydrogen production have been two main points of interest under the hydrogen umbrella, with the rise of decarbonization and sustainable energy trends making way for innovations within the renewable energy sector. This article explores some of the latest developments within the hydrogen sector.

This webinar on Tuesday 25th November, presented by IDTechEx Senior Technology Analyst Conrad Nichols, will discuss thermal management and fire prevention trends for battery energy storage systems (BESS). Choose your preferred time zone - the webinar runs three times during the day.

Proton exchange membrane (PEM) fuel cells will see uptake in a range of mobility and stationary applications, with specific technology trends for the individual fuel cell components. This article introduces these constituent components, and the associated trends seen in the market.

IDTechEx's research encompasses a wide range of existing innovative technologies with the potential to decarbonize the planet. However, costs are generally higher compared with the fossil fuel status quo. Creative market mechanisms are needed, unlocking green technologies for buyers across a wide range of sectors and geographies.

Amine solvents are the leading technologies for post-combustion capture, but innovation is ongoing. In this article, IDTechEx explores technologies and markets for post-combustion capture.

New sustainability innovations and trends are ever emerging under the decarbonization umbrella, evident amongst a number of material sectors. This article explores next-generation feedstocks, speciality chemicals, and the production of green steel.

Increased efficiency and flexibility are two increasingly desirable qualities of photovoltaics, and the implementation of new materials and form factors could reshape the landscape of solar energy. This article covers developments in thin-film photovoltaic technology and the adoption of new materials like perovskites.

Building a hydrogen economy is widely considered to be an essential part of global decarbonization. Green hydrogen could play an important role in mitigating environmental impacts and support the transition to a cleaner energy system. This article explores emerging applications and electrolyzer technologies.

Thermal runaway in lithium-ion (Li-ion) batteries has become one of the most pressing challenges for the global battery energy storage system (BESS) industry.

2025 has been a turning point for the power electronics industry. Despite a slowdown in EV (electric vehicle) sales, IDTechEx forecasts a tripling in the market size of the power electronics for electric vehicles market, to US$42 billion by 2036. In IDTechEx's new report, "Power Electronics for Electric Vehicles 2026-2036: Technologies, Markets, and Forecasts", these trends are analyzed and used to forecast unit sales, market size, and US$ per kW.