Fuel cell electric vehicles, Li-ion battery-powered cars, and carbon dioxide removal strategies all work to reduce global CO2 emissions. IDTechEx has a multitude of sustainability reports that give outlooks on the shared efforts of various sectors to reduce CO2 emissions in the air, to promote a cleaner way forward.

Owing to their exceptional design flexibility, structural versatility, and high porosity, metal-organic frameworks (MOFs) are gathering interest for a wide range of applications, such as water harvesting for HVAC, direct lithium extraction, refrigerant reclamation, hydrogen storage, chemical purifications, and many more.

Industries have traditionally used fossil fuels to produce heat for their processes or to fuel power plants to generate electricity, including the use of natural gas, oil, and coal. Industrial heating processes are responsible for ~25% of global emissions, and therefore, great attention from governments and states is being seen to decarbonize this area of industry.

Electric buses are booming, with sales growing in Europe, America, India, and other key regions. Transport operators have shown themselves keen to electrify urban transport and cut greenhouse gas emissions. As emissions regulations tighten, city buses are likely to be all-electric within the next few years.

Thursday 11 July 2024 - SiC, GaN, and the Evolution of Power Electronics. In this webinar, IDTechEx will summarize the current market landscape concerning the wide bandgap semiconductors SiC and GaN and other EV power electronics market trends.

With the trend from Si IGBT to SiC MOSFET in electric vehicle (EV) power electronics, the junction temperature is expected to increase from 150°C to 175°C with the potential to exceed 200°C. This brings significant challenges for thermal management.

Wednesday 3 July 2024 - Introduction to the broad family of conductive inks; Status and outlook for the dominant conductive ink type, silver flake-based ink, including an assessment of current demand and a ten-year forecast; Overview of emerging applications; Critical assessment of the outlook for non-silver inks such as stretchable/thermoformable inks and copper inks.

The mounting global plastic waste crisis has compelled scientists and engineers to seek novel solutions. Among the various technologies being explored, the pyrolysis of plastic waste has emerged as a significant contender.

Every year, our oceans absorb 11-15 gigatonnes of CO2 as part of the Earth's natural carbon cycle. An unsung hero in the face of rising global temperatures, negative emission technology pioneers have begun asking a simple question: What if the power of this immense marine carbon sink could be harnessed even further?

In 2008, the commercialization of the silicon carbide (SiC) MOSFET marked a major turning point for the power semiconductor market, representing its first significant development in decades. This technology was pioneered in electric vehicles (EVs) with the 2017 Tesla Model 3. The SiC MOSFET is a transistor that promises high power density, greater efficiency, and is less fallible to high temperatures.

In April 2024, global energy, technology, and utility provider Hitachi Energy announced a US$1.5 billion investment program to ramp up global transformer production by 2027. IDTechEx's research into electrical grids indicates that transformers are a critical component and potential supply bottleneck for large-scale grid upgrades. These upgrades are essential as society shifts from a transportation sector fuelled by petrochemicals transported in tankers to a sector powered by electricity carried by wires.

Creating a circular economy is an essential sustainability target for numerous stakeholders in the supply chain: governments, brands, suppliers, and consumers. A key element of this is reducing plastic waste; the OECD estimated that over 350 million metric tonnes of plastic waste was generated globally in 2019

Electric vehicle (EV) related news has been somewhat bleak in the first part of 2024; you will have heard a lot about the downturn in the EV market and OEMs scaling back plans. This might make one think that EVs are beyond their hype and that they will not be the solution of the future, but is that really the message we should be taking away? In this article, IDTechEx discusses the current statistics, the state of the market, and the outlook for the future.

Thursday 13 June 2024 - Chemical Recycling: Navigating the Landscape of Innovative Technologies and Scaling Challenges; An overview of chemical recycling of plastic technologies; Challenges to adoption and scaling; The challenges faced by enzymatic depolymerization; Chain of custody approaches; IDTechEx's outlook and conclusions

Heating and cooling accounts for approximately 50% of global energy consumption, with 30% of this consumption represented by heating demand from industry. Given that the great majority of industrial heating processes use fossil fuels to generate heat, this has caused industrial heating processes to be responsible for ~25% of global emissions.

According to IEA's 2023 update to its net zero roadmap, carbon capture technologies, more efficient space cooling equipment, and clean energy transitions are all cornerstones of achieving net zero by 2050 and limiting global warming to 1.5°C. Emerging technologies utilizing metal-organic framework (MOF) materials for carbon capture, refrigerant reclamation, direct lithium extraction, HVAC equipment, and various other chemical separations and purification processes can see the advent of disruptive next-generation technologies that are essential for industrial decarbonization.

Wednesday 5 June 2024 - Carbon Credit Markets: The Rise of Durable, Engineered Carbon Dioxide Removal Technologies; Importance of carbon dioxide removal in reaching global net-zero emissions targets; Overview of all negative emission technologies (NETs): Direct air carbon capture and storage (DACCS), Biomass with carbon removal and storage (BiCRS), Nature-based CDR methods, Mineralization NETs, and ocean-based CDR approaches; Contextualization of CDR within carbon markets and how voluntary carbon credits are accelerating NETs in the short-term; Identifying the key factors driving the market pivot from nature-based solutions such as afforestation/reforestation to durable, engineered, CDR approaches; Discussion of environmental, technical, and economic drivers/barriers for DACCS and BECCS

In a world where fossil fuels are increasingly being avoided, and the mounting problem of plastic waste management intensifies, a new approach to plastic waste has attracted much attention. Advanced recycling technologies such as chemical recycling and the dissolution of plastic waste aim to increase the circularity of the plastics economy.

Green hydrogen production utilizes four main electrolyzer technologies: alkaline water electrolysis (AWE), proton exchange membrane (PEM), anion exchange membrane (AEM), and solid oxide electrolyzers (SOEC). Each technology has its own operational principles, performance characteristics, and commercial maturity.

Carbon dioxide removal (CDR) will be needed to reach any international net zero emission targets and avoid global warming beyond 1.5-2°C. Negative emissions technologies (NETs), especially those that go beyond nature-based approaches to provide long-lasting scalable CO2 removals, have therefore been receiving increased support through government policy and voluntary carbon credit purchases from corporations with ambitious climate goals.